2 Press MULTI-CONTROL to switch the tel-
ephone muting/attenuation.
Pressing
MULTI-CONTROL
will switch be-
tween
TEL ATT
(attenuation) and
TEL mute
(muting) and that status will be displayed.
Switching the feature demo
The feature demo automatically starts when
power to this unit is turned off while the igni-
tion switch is set to ACC or ON.
1 Use MULTI-CONTROL to select
Demonstration.
Demonstration
appears in the display.
2 Press MULTI-CONTROL to turn the fea-
ture demo on.
ON
appears in the display.
#
To turn the feature demo off, press
MULTI-CONTROL
again.
Notes
!
Remember that if the feature demo continues
operating when the car engine is turned off, it
may drain battery power.
!
You can also turn on or off feature demo by
pressing
DISPLAY
while this unit is turned off.
For more details, see
Feature demo mode
on
page 9.
Switching the reverse mode
If you do not perform an operation within
about 30 seconds, screen indications start to
reverse, and then continue reversing every 10
seconds.
1 Use MULTI-CONTROL to select
Reverse mode.
Reverse mode
appears in the display.
2 Press MULTI-CONTROL to turn the re-
verse mode on.
ON
appears in the display.
#
To turn the reverse mode off, press
MULTI-CONTROL
again.
Note
You can also turn on or off reverse mode by press-
ing
BAND
while this unit is turned off. For more
details, see
Reverse mode
on page 9.
Switching the Ever Scroll
When Ever Scroll is set to ON, text information
recorded on CD or iPod scrolls continuously in
the display. Set to OFF if you prefer the infor-
mation to scroll just once.
1 Use MULTI-CONTROL to select
Ever-scroll.
Ever-scroll
appears in the display.
2 Press MULTI-CONTROL to turn the Ever
Scroll on.
ON
appears in the display.
#
To turn the Ever Scroll off, press
MULTI-CONTROL
again.
Initial Settings
En
63
English
Section
14