Adjusting initial settings
1
1
1
Using the initial settings, you can customize
various system settings to achieve optimal per-
formance from this unit.
1
Function display
Shows the function status.
1 Press SOURCE and hold until the unit
turns off.
2 Press MULTI-CONTROL and hold until
Language select appears in the display.
3Turn MULTI-CONTROL to select one of
the initial settings.
Turn
MULTI-CONTROL
clockwise to switch be-
tween the functions in the following order:
Language select
(language selection)
Clock
(clock)
Warning tone
(warning tone)
Face auto open
(face auto open)
AUX1
(auxiliary input 1)
AUX2
(auxiliary input 2)
Dimmer
(dimmer)
Brightness
(bright-
ness)
Sub/W control
(rear output and sub-
woofer controller)
Mute
(sound muting/
attenuation)
Demonstration
(feature demo)
Reverse mode
(reverse mode)
Ever-scroll
(ever scroll)
Use the following instructions to operate each
particular setting.
#
You can also switch between the functions in
reverse order by turning
MULTI-CONTROL
coun-
terclockwise.
#
To cancel initial settings, press
BAND
.
Selecting the display language
For your convenience, this unit equips multi-
ple language display. You can select the lan-
guage best suited to your first language.
1 Use MULTI-CONTROL to select
Language select.
Language select
appears in the display.
2 Press MULTI-CONTROL to select the lan-
guage.
Each press of
MULTI-CONTROL
selects lan-
guages in the following order:
English
Français
Español
Setting the clock
Use these instructions to set the clock.
1 Use MULTI-CONTROL to select Clock.
Clock
appears in the display.
2 Push MULTI-CONTROL left or right to
select the segment of the clock display you
wish to set.
Pushing
MULTI-CONTROL
left or right will se-
lect one segment of the clock display:
Hour
Minute
As you select segments of the clock display
the segment selected will blink.
Initial Settings
En
60
Section
14
