Turning the clockdisplay
on or off
You can turn the clock display on or off.
%
Press CLOCK to turn the clock display
on or off.
Each press of
CLOCK
turns the clock display
on or off.
Note
Even when the sources are off, the clock display
appears on the display. Pressing
CLOCK
when
the sources and feature demo are off, turns the
clock display on or off.
Using the AUX source
This unit can control up to two auxiliary equip-
ments such as VCR or portable devices (sold
separately). When connected, auxiliary equip-
ments are automatically read in as AUX
sources and assigned to
AUX1
or
AUX2
. The
relationship between
AUX1
and
AUX2
sources is explained below.
About
AUX1
and
AUX2
You have two methods to connect auxiliary
equipments to this unit.
AUX1
source:
When connecting auxiliary equipment using a
2.5 mm stereo plug cable
1 Press and hold EJECT to open the front
panel.
AUX1 input jack appears.
2 Insert the 2.5 mm stereo plug into the
AUX1 input jack on this unit.
The allocation of this auxiliary equipment is
automatically set to
AUX1
.
AUX2
source:
When connecting auxiliary equipment using an
IP-BUS-RCA Interconnector (sold separately)
%
Use an IP-BUS-RCA Interconnector such
as the CD-RB20/CD-RB10 (sold separetely)
to connect this unit to auxiliary equipment
featuring RCA output.
For more details, refer to the IP-BUS-RCA Inter-
connector owner's manual.
The allocation of this auxiliary equipment is
automatically set to
AUX2
.
#
You can only make this type of connection if
the auxiliary equipment has RCA outputs.
Selecting AUX as the source
%
Press SOURCE to select AUX as the
source.
Press
SOURCE
until
AUX
appears in the dis-
play.
#
If the auxiliary setting is not turned on,
AUX
cannot be selected. For more details, see
Switch-
ing the auxiliary setting
on page 61.
Setting the AUX title
The title displayed for each
AUX1
or
AUX2
source can be changed.
Other Functions
En
64
Section
15
