En
27
Changing
the
settings
Changing the velocity curve setting of velocity
sampler mode
Use the procedure below to set the velocity curve of velocity sampler mode. You can
choose one of four velocity curves.
!
By default, curve 3 is set.
Press the [AUTO BEAT LOOP] button on the left deck.
The velocity curve setting changes each time the [
AUTO BEAT LOOP
] button is
pressed.
The currently set value is indicated by how the [
LOOP 1/2X
], [
LOOP 2X
], [
LOOP IN
]
and [
LOOP OUT
] buttons light.
Curve 1
MIDI
code
Strength which
performance pad is pressed
Min.
Max.
Curve 2
MIDI
code
Strength which
performance pad is pressed
Min.
Max.
Curve 3
MIDI
code
Strength which
performance pad is pressed
Min.
Max.
Curve 4
MIDI
code
Strength which
performance pad is pressed
Min.
Max.
Adjusting the crossfader cut lag
Adjust the cut lag on both edges of the crossfader. It can be adjusted between 0
(0.5 mm) and 52 (5.7 mm) in increments of 0.1 mm.
!
The above cut lag position for the cut lag setting is a guide and it may not match
the position at which the sound volume becomes zero.
!
By default, it is set to 5 (1 mm).
Turn the rotary selector.
The current setting (0 to 52) is displayed by the lit condition of the channel level
indicator.
!
Number of lit segments of the [
CH3
] channel level indicator: Ten’s place
!
Number of lit segments of the [
CH1
] channel level indicator: One’s place
Setting the microphone output of the booth
monitor
!
By default, it is set to output microphone sound from the [
BOOTH OUT
]
terminal.
Press the [SAMPLER] mode button on the right deck.
!
[
SAMPLER
] button lit: Outputs microphone sound from the [
BOOTH OUT
]
terminal
!
[
SAMPLER
] button off: Does not output microphone sound from the [
BOOTH
OUT
] terminal
Switching illumination mode in the white area
of the jog dial
You can adjust the lit pattern of the white area of the illumination around the jog dial
center part.
!
The illumination can be set for decks 1 / 2 and decks 3 / 4, separately.
!
By default, decks 1 and 2 are set to pattern 2 and decks 3 and 4 are set to pat-
tern 4.
Press any of performance pads 1 to 5 of the left deck (right
deck).
The illumination at the center of the jog dials lights once around. The current setting
is indicated by how the performance pads light.
When a performance pad on the left side deck is pressed, illumination for decks 1
and 2 is set. When a performance pad on the right side deck is pressed, illumination
for decks 3 and 4 is set.
Pattern 1
Lit
Off
Pattern 2
Pattern 3
Pattern 4
Pattern 5
Dimly lit