37
En
07
Au
di
o Ou
tp
ut
Digital Output
Bitstream
Select this to output digital audio signals directly.
PCM
Select this to output digital audio signals converted to 2-channel audio
signals.
Reencode
When a BD containing secondary audio and interactive audio is played, the
two audio signals are mixed and converted to Dolby Digital audio or DTS
audio for output.
Off
Select this to output audio signals other than digital audio signals.
Downmix
Stereo
Surround audio signals converted to linear PCM audio signals are converted
into 2-channel (stereo) signals for output.
Lt/Rt
Surround for output (when the connected AV receiver or amplifier, etc., is
compatible with Dolby Pro Logic, the AV receiver or amplifier outputs the
linear PCM audio signals as surround audio signals).
Max Sampling Frequency
48k
Outputs audio signals that are limited to a sampling frequency below the set
sampling frequency from the
DIGITAL OUT
terminal. Select according to the
performance of the connected device.
96k
192k
• When playing back a sampling frequency file or a disk having a lower than or equal setting compared to the present setting,
you can output it at the unchanged sampling frequency.
• Sources with sampling frequencies of over 192 kHz cannot be played.
• When playing copyright-protected discs or files, the signals are output with the sampling frequency limited to 48 kHz or below,
regardless of this setting.
DRC (Dynamic Range
Control)*
Off
Select this to output audio signals without using the DRC function.
On
Select this to adjust the range between the loudest and softest sounds
(dynamic range) for playback at average volume. Use this when it is hard to
hear dialog or when watching movies at midnight.
Auto
Select to switch the DRC setting On/Off automatically according to the input
audio signal from the disc. This only affects Dolby TrueHD signals.
• This affects such audio signals as Dolby Digital, Dolby TrueHD, and Dolby Digital Plus.
• DRC affects audio signals output from the following audio output terminals:
– Analog audio signals output from the
AUDIO OUT
terminals
– Linear PCM audio signals output from the
DIGITAL OUT
or
HDMI OUT
terminals
• Depending on the disc, the effect may be weak.
• The effect may differ depending on the speakers, the AV amplifier settings, etc.
*
• This affects such audio signals as Dolby Digital, Dolby TrueHD, and Dolby Digital Plus.
• DRC affects audio signals output from the following audio output terminals:
– Analog audio signals output from the AUDIO OUT terminals
– Linear PCM audio signals output from the DIGITAL OUT or HDMI OUT terminals
• Depending on the disc, the effect may be weak.
• The effect may differ depending on the speakers, the AV amplifier settings, etc.
HDM
I
Color Space
RGB
Select this to output the video signals as RGB signals. Choose this if the
colors seem too faint and the black seems too bright.
YCbCr
Select this to output the video signals as YCbCr 4:4:4 signals.
YCbCr 422
Select this to output the video signals as YCbCr 4:2:2 signals.
Full RGB
Select this to output the video signals as RGB signals. Choose this if the colors
seem too dense and all the dark colors are displayed in a uniform black.
Resolution
Auto
Select this to choose the resolution of the video signals output from the
HDMI OUT
terminal automatically.
480I/576I
Output the video signals from the
HDMI OUT
terminal with the selected
resolution.
The resolution can be changed by pressing
HDMI
, but
Auto
cannot be
selected.
The resolution switches each time
HDMI
is pressed.
480P/576P
720P
1080I
1080P
Setting
Options
Explanation
BDP-170_72-BDP170-GBRB1_En.book 37 ページ ２０１４年３月２８日 金曜日 午前９時２６分
