Pioneer AVIC Z3 - Navigation System With DVD player, Operation Manual

Page: 145 / 211

Front: 15
to
Rear: 15
is displayed as the front/
rear speaker balance moves from front to rear.
When the rear output setting is
Rear SP
Sub.W
, you cannot adjust front/rear speaker
balance.
=
For details, refer to Setting the rear output
and subwoofer controller on page 152
3 Touch
c
or
d
to adjust left/right speak-
er balance.
Each time you touch
c
or
d
moves the left/
right speaker balance towards the left or the
right.
Left: 9
to
Right: 9
is displayed as the left/right
speaker balance moves from left to right.
Using subwoofer output
This navigation system is equipped with a sub-
woofer output which can be turned on or off.
p
When the subwoofer output is on, you can
adjust the cut-off frequency, the output
level, and the phase of the subwoofer.
1 Touch [Sub Woofer] in Audio Settings
menu.
When
Preout
(the subwoofer controller set-
ting in System Settings menu) is Full , you
cannot select [ Sub Woofer ].
=
For details, refer to Setting the rear output
and subwoofer controller on page 152
2 Touch [On] to turn subwoofer output
on.
To turn subwoofer output off, touch [ Off ].
3 Touch [Reverse] or [Normal] to select
the phase of subwoofer output.
p
If subwoofer output sound is not clear with
[
Normal ], change it to [ Reverse ].
4 Touch
c
or
d
to select cut-off fre-
quency.
Each time you touch
c
or
d
selects cut-off fre-
quencies in the following order:
50
—
80
—
125 (Hz)
Only frequencies lower than those in the se-
lected range are output from the subwoofer.
5 Touch [+] or [-] to adjust the output
level of the subwoofer.
+6
to -6 is displayed as the level is increased
or decreased.
Using non fading output
When the non fading output setting is on, the
audio signal does not pass through navigation
system
’
s low pass filter (for the subwoofer),
but is output through the RCA output.
1 Touch [Non Fading] in Audio Settings
menu.
Only when Preout (the subwoofer controller
setting in
System Settings
menu) is
Full
, you
can select [ Non Fading ].
=
For details, refer to Setting the rear output
and subwoofer controller on page 152
2 Touch [On] to turn non fading output
on.
To turn non fading output off, touch [
Off
].
3 Touch [+] or [-] to adjust the output
level of the non fading.
+6
to
-6
is displayed as the level is increased
or decreased.
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Touch [Loudness] in Audio Settings
menu.
2 Touch [On] to turn loudness on.
To turn loudness off, touch [
Off
].
Customizing the Audio Setting related with Audio Visual
En
145
Chapter
17
Customizing
the
Audio
Setting
related
with
Audio
Vi
sual