Setting the
Vehicle Dynamics
Display
You can change the contents of the meters on
the left and right of the
Vehicle Dynamics
Dis-
play.
Until the sensor
’
s initial learning is complete,
only the voltage and clock are available.
p
The speed displayed is a guideline and may
not correspond to the actual speed.
1
Switch to Vehicle Dynamics Display.
=
For more details about
“
Changing the map
display mode
”
, refer to
Switching the view
mode
on page 38
2
Touch the left or right meter.
Touch panel keys are displayed.
3
Touch the items you want to display.
You can select the following items:
[
Voltage
]:
Displays the power supply and voltage sup-
plied from the battery to this system.
[
Acceleration
]:
Acceleration in a forward direction is dis-
played. The
+
sign indicates acceleration while
the
-
sign indicates deceleration.
[
Side Acceleration
]:
Acceleration in a side direction such as when
turning, is displayed. The
+
sign indicates a
right turn, while the
-
sign indicates a left turn.
[
Angular Velocity
]:
Displays the vehicle
’
s turning angle over one
second (how far it has turned in a second).
[
Slope
]:
Displays the vehicle
’
s vertical movement.
+
side represents the rising angle, and
-
side the
falling angle.
[
Direction
]:
Displays the direction your vehicle is traveling
in.
[
Clock
]:
Current time is displayed.
[
Adjust Look
]:
Touch [
Adjust Look
] to display a screen for se-
lecting the panel pattern. Touch one of the pat-
terns from among those displayed on screen
to change the panel to the selected pattern.
p
If you touch [
Peak Hold Reset
], the maxi-
mum and minimum (green line) values indi-
cated in [
Acceleration
] and [
Side
Acceleration
] are reset.
p
You cannot change the speedometer at the
center.
p
Selecting
Demo Mode
in the
Settings
menu enables you to perform a demonstra-
tion with random values.
Using XM Tuner and Other Information
En
76
Chapter
09
Summary of Contents for AVIC Z3 - Navigation System With DVD player
Page 186: ...Appendix En 186 Appendix ...
