Pioneer AVIC N2 - Navigation System With DVD player, Operation Manual

Page: 99 / 139

97
Chapter 8
Customizing the Audio Source Setting
AV
setting, camera image is not resized to fit, but
that a portion of what is seen by the camera is
not viewable.
• Pioneer recommends the use of a camera
which outputs mirror reversed images,
otherwise screen image may appear
reversed.
• Confirm the setting immediately whether the
display changes to a rear view camera image
when the shift lever is moved to REVERSE (R)
from another position.
• When the whole screen changes to a rear view
camera image during normal driving, switch to
another setting.
❒
Rear View can be displayed at all times (e.g.
when monitoring an attached trailer, etc.) as a
split screen where map information is par-
tially displayed. Please beware that in this set-
ting, camera image is not resized to fit, but
that a portion of what is seen by the camera is
not viewable.
❒
Initially, this function is set to OFF .
1
Touch “CAMERA” in the SETUP menu.
2
Touch “CAMERA” to turn rear view cam-
era setting on.
Touching “ CAMERA ” switches between
“ ON ” and “ OFF ”.
❒
Unless this setting is “ ON ”, you cannot
switch to Rear View mode.
3
Touch “POLARITY” to select an appropri-
ate setting for polarity.
Each time you touch “ POLARITY ” switches
between the following polarity:
• BATTERY — When the polarity of the con-
nected lead is positive while the shift lever
is REVERSE (R) position
• GND — When the polarity of the connected
lead is negative while the shift lever is
REVERSE (R) position
Selecting the video of rear dis-
play
When the navigation screen is displayed on front,
you can select either showing the navigation
screen on rear display or the video of the selected
source.
❒
The map screen navigation images output to
the rear display differ from standard NTSC for-
mat images. Therefore, their quality will be
inferior to the images that appear on the front
display.
1
Touch “REAR DISP” in the SETUP menu.
Each touch of the “ REAR DISP ” changes the
settings as follows:
• SOURCE — Display the video of the
selected source on rear display
• NAVI — Display the navigation video on
rear display when the navigation screen is
displayed on front
❒
When selecting “ SOURCE ” in “ REAR
DISP ”, when the selected source is an
audio source, nothing is displayed on rear
display.
❒
When selecting Rear View , nothing is dis-
played on the left-hand side of the rear dis-
play.
Setting the slide back function
You can adjust the LCD panel slide position to
prevent the display from hitting the shift lever of
an automatic vehicle when it is in P (park) posi-
tion.
❒
Please be careful, as the LCD panel will slide
immediately after the setting is turned “
ON ”.
1
Touch “FLAP SET BACK” in the SETUP
menu.
Touching “ FLAP SET BACK ” switches
between “ ON ” and “ OFF ”.
Other Functions