Pioneer AVIC N2 - Navigation System With DVD player, Operation Manual

Page: 81 / 139

79
Chapter 7
Using the AV Source (Pioneer AV Equipments)
AV
Chapter 7
Using the AV Source (Pioneer AV Equipments)
When Pioneer audio equipment is connected to
the Navigation System using IP-BUS or AV-BUS,
such equipment can be operated from the navi-
gation unit. This chapter describes the operation
of the audio source that can be used when the
Pioneer audio equipment is connected.
When reading this chapter, please also refer to
the operation manual of the AV equipment con-
nected to the Navigation System.
Multi-CD Player
Listening a CD
You can use navigation unit to control a multi-CD
player, which is sold separately.
These are the basic steps necessary to play a CD
with your multi-CD player.
➲
More advanced M-CD operation
➞
Page 80
❒
Pressing the DISP button changes the
screen display.
➲
Switching screen display
➞
Page 98
(1) Source icon
Shows which source has been selected.
(2) Disc number indicator
Shows the disc currently playing.
(3) Track number indicator
Shows the track currently playing.
(4) Play time indicator
Shows the elapsed playing time of the current
track.
(5) Disc list display
Shows the disc title list.
1
Touch the source icon and then touch “M-
CD” to select the multi-CD player.
2
Touch the screen to display the touch
panel keys.
3
Touch any of 01 — 06 to select a disc you
want to listen to.
If you want to select a disc located at 7 to 12,
touch
or to display 07 — 12 .
When 01 — 06 and 07 — 12 are not displayed,
you can display them by touching “ DISP ”.
You can also sequentially select a disc by
touching
or or moving the joystick up or
down.
4
To skip back or forward to another track,
touch
or .
Touching skips to the start of the next track.
Touching once skips to the start of the cur-
rent track. Touching again will skip to the pre-
vious track.
You can also skip back or forward to another
track by moving the joystick left or right.
5
To perform fast forward or reverse, keep
touching
or .
You can also perform fast reverse/fast forward
by holding the joystick left or right.
❒
When the multi-CD player has performed
the preparatory operations,
READY is dis-
played.
❒
If the multi-CD player does not operate
properly, an error message such as
ERROR-11 may be displayed. Refer to the
multi-CD player owner’s manual.
❒
If there are no discs in the multi-CD player
magazine,
NO DISC is displayed.
50-disc multi-CD player
Only those functions described in this manual
are supported for 50-disc multi-CD players.
(But this unit can perform the disc list display up
to Disc 12 with a 50-disc multi-CD player.)
(2) (1) (4)
(5)
(3)
M-CD