Pioneer AVIC N2 - Navigation System With DVD player, Operation Manual

Page: 26 / 139

24
Chapter 1
Basic Operation
NAVI/AV
Memory navi mode
While the map disc is inserted, you can store the
data on the map disc into the memory of the nav-
igation unit. If the map disc is removed from the
navigation unit after the data is stored, navigation
is performed using the data in the memory
(memory navi mode). In the memory navi mode,
you can play a music CD or DVD-Video on the
navigation unit while navigation is taking place.
The operation is automatically switched to the
memory navi mode when the map disc is
removed from the navigation unit.
Navigation in the memory navi mode
During the memory navi mode, navigation is per-
formed only using the data read into the memory.
Therefore, some functions are restricted com-
pared with navigation using the map disc (DVD
navi mode). These functions buttons, which can-
not be used in the memory navi mode, are indi-
cated in light gray. (For details, see page 26.) If
you want to use these functions, please insert the
map disc again. In addition, you may need to
insert the map disc and store new data in the
memory during navigation operation, such as
when the destination is far away. The memory
navi mode uses the following map data to per-
form navigation.
Memory navi indicator
When new route guidance starts, the route data
from the map disc is read into the memory of the
navigation unit. The status of the memory navi
mode is indicated by the following icons on the
lower right of the map screen.
(Green flashes): Reading the data
(Green is lit): Operated in memory navi mode
(Red is lit): Operated in memory navi mode,
but the distance for guidance is 12.5 mi or less.
❒
Where the distance for navigation guidance is
unknown, the icon flashes red. In that case,
the guidance may suddenly fail. It is therefore
recommended to reinsert the map disc.
When disappears, memory navi mode is
ready. You can now remove the map disc and use
the memory navi mode function.
How to listen to a CD
You can listen to a CD by removing the map disc
from the navigation unit.
➲
About Memory Navigation
➞
“Memory navi
mode” on page 24. (For details, see page 107.)
1
Press the EJECT button to remove the
map disc.
2
Insert the CD to the disc loading slot.
• Be sure to carefully insert the disc horizon-
tally into the disc loading slot. When the
disc is inserted halfway, the DVD drive
will begin loading automatically.
• Do not forcibly insert the disc on an angle,
as this indicates that disc is not entering
the disc loading slot and may be damaged.