89
Chapter 8
Customizing the Audio Source Setting
AV
Other Functions
Setup adjustments
(1) Setup menu display
Shows the setup function names.
➲
How to display the
SETUP
menu
➞
Page 59
Setting the video input
You can switch the setting according to the con-
nected component.
• Select “
VIDEO
” to watch video of a connected
component as
AV
source.
• Select “
M-DVD
” to watch video of a connected
DVD player as
S-DVD
source.
1
Touch “AV INPUT” in the SETUP menu.
Each touch of the “
AV INPUT
” changes the
settings as follows:
•
OFF
— No video component is connected
•
VIDEO
— External video component
•
M-DVD
— DVD player connected with
RCA cable
When a DVD player is connected with an AV-
BUS cable, do not select “
M-DVD
” or else no
picture is displayed even if you select
S-DVD
.
Setting for rear view camera
The navigation unit features a function that auto-
matically switches to the rear camera image
(REAR VIEW CAMERA IN jack) when a rear cam-
era is installed on your vehicle. When the shift
lever is in REVERSE (R) position, the screen auto-
matically switches to a rear view camera. (For
more details, consult with your dealer.) You can
also use the camera as a rear view camera (
Rear
View
). In this case, you can see the image of the
rear view camera during normal driving. (The
navigation map screen can be displayed on the
right-hand side and the camera image can be
displayed on the left.) Please beware that in this
setting, camera image is not resized to fit, but
that a portion of what is seen by the camera is
not viewable.
• Pioneer recommends the use of a camera
which outputs mirror reversed images,
otherwise screen image may appear
reversed.
• Confirm the setting immediately whether the
display changes to a rear view camera image
when the shift lever is moved to REVERSE (R)
from another position.
• When the whole screen changes to a rear view
camera image during normal driving, switch to
another setting.
❒
Rear View
can be displayed at all times (e.g.
when monitoring an attached trailer, etc.) as a
split screen where map information is par-
tially displayed. Please beware that in this set-
ting, camera image is not resized to fit, but
that a portion of what is seen by the camera is
not viewable.
❒
Initially, this function is set to
OFF
.
1
Touch “CAMERA” in the SETUP menu.
2
Touch “CAMERA” to turn rear view cam-
era setting on.
Touching “
CAMERA
” switches between
“
ON
” and “
OFF
”.
❒
Unless this setting is “
ON
”, you cannot
switch to Rear View mode.
3
Touch “POLARITY” to select an appropri-
ate setting for polarity.
Each time you touch “
POLARITY
” switches
between the following polarity:
•
BATTERY
— When the polarity of the con-
nected lead is positive while the shift lever
is REVERSE (R) position
•
GND
— When the polarity of the connected
lead is negative while the shift lever is
REVERSE (R) position
Selecting the video of rear dis-
play
When the navigation screen is displayed on front,
you can select either showing the navigation
(1)
Other Functions
Summary of Contents for AVIC N1 - Navigation System With DVD player
