107
Appendix
NAVI/AV
Messages and how to react to them
The following messages may be displayed by your Navigation System.
❒
There are occasions when you may see error messages other than those shown here. In such a
case, follow the instructions given on the display.
No subtitles are displayed.
The DVD playing does not feature
subtitles.
Subtitles are not displayed if they are
not recorded on the disc.
You can only switch between items
indicated in the disc menu.
Switch using the disc menu.
Playback is not with the audio lan-
guage and subtitle language settings
selected in DVD SETUP.
The DVD playing does not feature
dialog or subtitles in the language
selected in DVD SETUP.
Switching to a selected language is
not possible if the language selected
in DVD SETUP is not recorded on the
disc.
Switching the viewing angle is not
possible.
The DVD playing does not feature
scenes shot from multiple angles.
You cannot switch between multiple
angles if the DVD does not feature
scenes recorded from multiple
angles.
You are trying to switch to multiple
angle viewing of a scene that is not
recorded from multiple angles.
Switch between multiple angles
when watching scenes recorded
from multiple angles.
The picture is extremely unclear/dis-
torted and dark during playback.
The disc features a signal to prohibit
copying. (Some discs may have this.)
Since this unit is compatible with the
copy guard analog copy protect sys-
tem, when playing a disc that has a
signal prohibiting copying, the pic-
ture may suffer from horizontal
stripes or other imperfections when
viewed on some displays. This does
not mean this unit is malfunctioning.
Message
When
What to do
You cannot use this function while
driving.
While trying to make a menu selec-
tion.
Pull over and come safely to a halt,
put the parking brake on, and then
try again.
This is not the appropriate disc.
Please insert the appropriate disc.
If you try to use a disc which is
incompatible with this system
(including the old version map disc).
Insert a suitable disc.
If you insert a disc upside down.
Insert the disc with the label upward.
If the disc is dirty.
Clean the disc.
If the disc is cracked or otherwise
damaged.
Insert a normal, round disc.
Irregular speed pulse signal is
detected. Please power off the sys-
tem and check the installation. After
you have checked, please re-boot the
system and press “OK”.
If the Navigation unit does not
receive the vehicle speed pulse.
Consult your Pioneer dealer.
Speed pulse wire is not connected.
System will start to learn without
speed pulse. Please keep in mind
that accuracy is not fully ensured
without speed pulse.
The speed signal input (pink lead
wire) of the power cable is not con-
nected.
To operate with 3D hybrid mode, con-
nect the speed signal input (pink
lead wire) of the power cable cor-
rectly. Although it can be operated
with Simple hybrid mode without
connecting the speed signal input,
the precision of the positioning will
be less accurate.
Vibration is detected. Please power
off the system and check the installa-
tion. After you have checked, please
re-boot the system and press “OK”.
Sensor NG (Vibration)
While the vehicle is stationary, the
Navigation System is installed in a
place where the navigation unit may
be affected by a large vibration.
Re-install the navigation unit of the
Navigation System in a place where
the navigation unit will not be
affected by vibration.
Symptom
Cause
Action (See)
Summary of Contents for AVIC N1 - Navigation System With DVD player
