Pioneer AVIC N1 - Navigation System With DVD player, Operation Manual

Page: 55 / 127

53
Chapter 4
Editing the Navigation Utilities
NAVI
5. Power Voltage
The power supply (reference value) pro-
vided from the vehicle battery to this unit is
shown. If the voltage does not fall within the
range of 11 to 15V, check that power cable
connection is correct.
6. Illumination
When the headlights or small lamps of a
vehicle are on, “
On ” is displayed. (If the
orange/white lead is not connected, “ Off ”
appears.)
7. Back Signal
When the gear lever is shifted to “R”, the
signal switches to “
High ” or “ Low ”. (Which
of these is displayed depends on the vehi-
cle.)
Setting the Vehicle Dynamics
Display
You can change the values displayed by in the
instruments on the left and right of the Sensor
View.
❒
Vehicle Dynamics cannot be displayed if
sensor initialization is not complete.
1
Switch to the Vehicle Dynamics Display.
➲
Changing the map display mode
➞
Page 29
2
Touch the left or right instrument.
Touch keys are displayed.
3
Touch the items you want to display.
You can select the following items.
•
Voltage
• Acceleration :
Acceleration in a forward direction is dis-
played. The + sign indicates acceleration
while the - sign indicates deceleration.
•
Side Acceleration :
Acceleration in the lateral direction is dis-
played. The + sign indicates a left turn, while
the – sign indicates a right turn.
•
Angular Velocity
• Slope
• Direction :
The direction your vehicle is traveling in is dis-
played.
•
Clock :
Current time is displayed.
❒
If you touch “ Peak Hold Reset ”, the maxi-
mum and minimum (green line) values
indicated in “
Acceleration ” and “ Side
Acceleration ” are reset.
❒
You cannot change the speedometer at the
center.
❒
Selecting Demo mode in the Settings
menu enables you to perform a demon-
stration with random values.