3 Touch PANORAMA and then touch
d
to
turn the Panorama control on.
#
To turn the Panorama control off, touch
c
.
4 Touch DIMENSION and then touch
c
or
d
to adjust front/surround speaker bal-
ance.
Each time you touch
c
or
d
it moves the
sound towards the front or the surrounds.
+3
3
is displayed as the front/surround
speaker balance moves from front to sur-
rounds.
5 Touch CENTER WIDTH and then touch
c
or
d
to adjust the center image.
Each time you touch
c
or
d
it gradually
spreads the center channel sound into the
front left and right speakers over a range
0
7
.
3
is the default and it
s recommended for
most recordings.
0
places all center sound in
the center speaker.
7
places all center sound
equally in the left/right speakers.
Setting the speaker setting
You need to make with/without (or yes/no) and
size (bass reproducing capacity) selection/ad-
justments depending on the installed speak-
ers. The size needs to be set to
LARGE
(large)
if the speaker is capable of reproducing
sounds of about 100 Hz or below. Otherwise
select
SMALL
(small).
!
Low frequency range is not output if the
subwoofer is set to
OFF
and the front and
rear speakers set to
SMALL
or
OFF
.
!
It is imperative that non-installed speakers
be set to
OFF
.
!
Set the front or rear speaker to
LARGE
if
the speaker is capable of reproducing bass
content, or if no subwoofer is installed.
1 Touch A.MENU and AUDIO and then
touch Sound Setting.
2 Touch SP SET.
3 Touch the speaker to be adjusted.
4 Touch
a
or
b
to select the correct size
for the selected speaker.
Each time you touch
a
or
b
it selects the size
in the following order:
OFF
(off)
SMALL
(small)
LARGE
(large)
#
You cannot select
OFF
, when the front speak-
ers have been selected.
#
You can turn
ON
or
OFF
, when the subwoofer
has been selected.
Correcting the subwoofer
s phase
If trying to boost the bass output of the sub-
woofer doesn
t do much or rather makes you
feel that the bass gets more murky, this may
indicate that the subwoofer
s output and bass
content you hear over other speakers cancel
each other out. To remove this problem, try
changing the phase setting for the subwoofer.
1 Touch A.MENU and AUDIO and then
touch Sound Setting.
2 Touch SP SET.
3 Touch the subwoofer.
4 Touch
a
to turn subwoofer output on.
#
To turn subwoofer output off, touch
b
.
5 Touch
c
or
d
to select the phase of sub-
woofer output.
Touch
d
to select normal phase and
NORMAL
appears in the display. Touch
c
to
select reverse phase and
REVERSE
appears in
the display.
Audio Adjustments
En
72
Section
14
