Loading a disc
%
Insert a discinto the discloading slot.
Playback will automatically start.
#
If
DVD AUTO PLAY
is turned off, touch the
source icon and then touch
DVD
to select
DVD
(refer to the previous page).
#
When a disc is loaded in this unit, touch the
source icon and then touch
DVD
to select
DVD
.
#
To eject a disc, press
EJECT
.
Notes
!
The DVD player plays one, standard, 12-cm or
8-cm (single) disc at a time. Do not use an
adapter when playing 8-cm discs.
!
Do not insert anything other than a disc into
the disc loading slot. Discs which can be
played back are listed on
Playable discs
on
page 7.
!
If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press
EJECT
to eject the disc, and check the
disc for damage before inserting it again.
!
If an error message such as
ERROR-02
is dis-
played, refer to
Error messages
on page 92.
Adjusting the volume
%
Use VOLUME to adjust the sound level.
With the head unit, rotate
VOLUME
to in-
crease or decrease the volume.
With the remote control, press
VOLUME
to in-
crease or decrease the volume.
Turning the unit off
%
When using the touch panel keys,
touch the source icon and then touch OFF.
#
When the source icon is not displayed, you
can display it by touching the screen.
%
When using the button, press SOURCE
and hold until the unit turns off.
Using the rear display
You can watch the video sources (such as
DVD
or
AV
) on rear display independently of
front display.
!
To watch a DVD/Video CD on the rear dis-
play only, switch the operation mode on the
remote control to
DVD
. And you can oper-
ate the DVD/Video CD playback on the rear
display independently by the remote con-
trol. (Refer to page 15.)
CAUTION
When you have turned the rear display output on
by pressing
REAR ON
, you cannot turn it off even
if you press
SOURCE
and hold. In this case, press
REAR ON
and hold to turn the rear display output
off.
%
Press REAR ON to select the video
source on the rear display.
Press
REAR ON
repeatedly to switch between
the following video sources:
F. SOURCE
(same source as the front display)
DVD
(built-in DVD player)
AV
(video input)
Rear display output is turned on and the illu-
mination color of
REAR ON
changes to a dif-
ferent color from the other buttons.
#
You can also perform this operation by press-
ing
REAR.S
on the remote control.
#
To turn the rear display output off, press
REAR ON
and hold.
#
When selecting
F. SOURCE
, when the selected
source is an audio source, nothing is displayed
on rear display.
#
When you watch
DVD
(built-in DVD player) on
both the front and the rear display, audio is not
outputted from
REAR OUT
.
Basic Operations
En
18
Section
04
