Introduction of advanced
Video CD operation
1
1
Function display
Shows the function names.
%
Touch A.MENU and then touch
FUNCTION to display the function names.
The function names are displayed and oper-
able ones are highlighted.
#
When
A.MENU
is not displayed, you can dis-
play it by touching the screen.
#
You can also display
MENU
by clicking the
joystick.
#
To go to the next group of function names,
touch
NEXT
.
#
To return to the previous group of function
names, touch
PREV
.
#
To return to the previous display, touch
BACK
.
#
To return to the playback display, touch
ESC
.
Notes
!
The dynamic range control is effective only on
Dolby Digital sounds. (Refer to page 40.)
!
If you do not operate the function within about
30 seconds, the display is automatically re-
turned to the playback display.
Repeating play
There are two repeat play ranges for the Video
CD playback:
TRACK
(track repeat) and
DISC
(disc repeat).
!
During PBC playback of Video CDs, this
function cannot be operated.
1 Touch A.MENU and FUNCTION and then
touch REPEAT.
2 Touch either of the following touch
panel keys to select the repeat range.
!
DISC
Repeat the current disc
!
TRACK
Repeat just the current track
Note
If you perform track search or fast forward/re-
verse, the repeat play range changes to
DISC
.
Pausing Video CD playback
Pause lets you temporarily stop disc playback.
%
Touch
f
during playback.
The icon
e
is displayed for four seconds and
playback is paused, letting you view a still
image.
#
To resume playback at the same point that you
turned pause on, touch
f
again.
Notes
!
You can also turn pause function on or off
using
PAUSE
. To display
PAUSE
, touch
A.MENU
and then touch
FUNCTION
.
!
Depending on the disc and the playback loca-
tion on the disc, the icon
may be displayed,
indicating that still playback is not possi-
ble.
Playing Video CDs
En
43
Section
08
Playing
Video
CDs