Switching the warning tone
If the front panel is not detached from the
head unit within five seconds of turning off the
ignition, a warning tone will sound. You can
turn off the warning tone.
1 Touch A.MENU and INITIAL and then
touch DETACH WARNING.
2 Touch
a
to turn warning tone on.
#
To turn warning tone off, touch
b
.
Switching the auxiliary setting
It is possible to use auxiliary equipment with
this unit. Activate the auxiliary setting when
using auxiliary equipment connected to this
unit.
1 Touch A.MENU and INITIAL and then
touch AUX.
2 Touch
a
to turn auxiliary setting on.
#
To turn auxiliary setting off, touch
b
.
Correcting distorted sound
You can minimize distortion that may be
caused by the equalizer curve settings.
Setting an equalizer level high can cause dis-
tortion. If high sound is crippled or distorted,
try switching to
LOW
. Normally, leave the set-
ting at
HIGH
to ensure quality sound.
1 Touch A.MENU and INITIAL and then
touch DIGITAL ATT.
2 Touch either of the following touch
panel keys to select the digital attenuator
setting.
!
HIGH
High quality sound
!
LOW
Minimize distortion sound
Switching the sound
muting/attenuation
Sound from this system is muted or attenu-
ated automatically when the signal from the
equipment with mute function is received.
!
The sound is turned off,
MUTE
is displayed
and no audio adjustments are possible.
!
The sound is attenuated,
ATT
is displayed
and no audio adjustments, except volume
control, are possible.
!
Sound from this system returns to normal
when the muting or attenuation is can-
celled.
Sound from this system is muted or attenu-
ated automatically when a call is made or re-
ceived using a cellular telephone connected to
this unit.
1 Touch A.MENU and INITIAL and then
touch TEL/GUIDE.
2 Touch any of the following touch panel
keys to select the desired setting.
!
MIXING
Mixing
!
ATT
10dB
Attenuation
!
ATT
20dB
Attenuation (
ATT
20dB
has a
stronger effect than
ATT
10dB
)
!
MUTE
Muting
Switching the automatic
disc playback
You can turn automatic disc playback on or off
when you insert a disc into the disc loading
slot. When this function is on, the disc will be
automatically played after it is inserted into
the disc loading slot.
Initially, this function is set to on.
1 Touch A.MENU and INITIAL and then
touch NEXT.
InitialSettings
En
84
Section
16