JUST
(just)
The picture is enlarged slightly at the center and
the amount of enlargement increases horizontally
to the ends, enabling you to enjoy a 4:3 picture
without sensing any disparity even on a wide
screen.
CINEMA
(cinema)
The picture is enlarged by the same proportion as
FULL
or
ZOOM
in the horizontal direction and by
an intermediate proportion between
FULL
and
ZOOM
in the vertical direction; ideal for a cine-
ma-sized picture (wide screen picture) where cap-
tions lie outside.
ZOOM
(zoom)
A 4:3 picture is enlarged in the same proportion
both vertically and horizontally; ideal for a cine-
ma-sized picture (wide screen picture).
NORMAL
(normal)
A 4:3 picture is displayed as it is, giving you no
sense of disparity since its proportions are the
same as that of the normal picture.
Notes
!
Different settings can be memorized for each
video source.
!
When video is viewed in a wide screen mode
that does not match its original aspect ratio, it
may appear different.
!
Remember that using the wide mode feature
of this system for commercial or public view-
ing purposes may constitute an infringement
on the author
s rights protected by the Copy-
right Law.
!
Video will appear grainy when viewed in
CINEMA
or
ZOOM
mode.
!
The rear view camera picture is always
FULL
.
Adjusting the picture
adjustment
You can adjust
BRIGHT
(brightness),
CONTRAST
(contrast),
COLOR
(color) and
HUE
(hue) for each source and rear view cam-
era.
!
The adjustments of
BRIGHT
and
CONTRAST
are stored separately for light
ambient (daytime) and dark ambient (night-
time). A sun
or moon
is displayed to
the left of
BRIGHT
and
CONTRAST
, respec-
tively, as the ambient light sensor deter-
mines brightness or darkness.
!
You cannot adjust
HUE
for PAL video.
!
You cannot adjust
COLOR
or
HUE
for the
audio source.
1 Press MENU and hold to display
PICTURE ADJUST.
Press
MENU
until
PICTURE ADJUST
appears
in the display.
#
You cannot use
MENU
on the remote control.
2 Touch any of the following touch panel
keys to select the function to be adjusted.
The adjustment function names are displayed
and adjustable ones are highlighted.
!
BRIGHT
Adjust the black intensity
!
CONTRAST
Adjust the contrast
!
COLOR
Adjust the color saturation
!
HUE
Adjust the tone of color (red is em-
phasized or green is emphasized)
!
DIMMER
Adjust the brightness of display
!
B.Camera
Switch to the picture adjust-
ment display for the rear view camera
!
SOURCE
Return to the picture adjustment
display for each source
#
You can adjust the picture adjustment for rear
view camera only when
BACK UP CAMERA
is
turned on. (Refer to
Setting for rear view camera
on page 86.)
#
SOURCE
will appear in the display instead of
B.Camera
when you select
B.Camera
.
Basic Operations
En
22
Section
04
