How the Machine Functions
Follow these instructions to begin operation:
1. Press the scrub brush motor pedal down and inward.
The inward motion will allow the pedal to move upward
and lower the scrub deck to the floor. This pedal is
located on the left side of the floor board. To
de-activate the scrub brush motors and raise the scrub
deck, press the pedal down and outward.
2. Pull the lever on the right side of the dashboard
inward to lower the squeegee and turn the vacuum
motor on.
3. Pull the solution control lever on the left side of the
dashboard inward. The solution flow is increased as
the lever is pulled farther in. The solution valve will
remain open until this lever is returned to the OFF
position
4. Be sure the forward/reverse switch is in the forward
position. When the accelerator lever is engaged the
scrub brushes will activate. When the accelerator lever
is released the scrub brushes will stop after a few
seconds. This is to prevent damage to the floor.
5. Do not leave the solution valve in the ON position .
The solution will continue to dispense until the solution
control lever is turned to the OFF position. It is not
turned ON and OFF with the scrub brushes.
Preparing and Starting the Machine
After charging, remove the Anderson connector of the
battery charger from the lower side of the machine
connector. Connect the plug of the machine to the battery
plug. Lower the solution tank back down using extreme
caution to avoid injury. With the solution tank lowered into
place the operator can now fill the solution tank with water
and the proper cleaning solution.
Choosing the Cleaner Solution
For a proper cleaning of the floor, it is important to choose
the appropriate cleaner solution. Your Amano Pioneer
Eclipse Authorized Distributor can recommend the
appropriate Amano Pioneer Eclipse cleaner for your
particular needs. It is recommended to use a low-foaming
detergent solution, or an anti-foaming additive, in order to
prevent damage to the vacuum motor.
CAUTION!
Make sure the cleaner solution is suitable for
the surface. Amano Pioneer Eclipse is not responsible for
damages done by too aggressive cleaning solutions.
11
Solution Tank Fill Cap
Summary of Contents for CleanStar 30M
