40
DJS-1000
1
2
3
4
A
B
C
D
E
F
1
2
3
4
x 6
:
x 6
:
CN7601
CN7251
1
2
1
2
1
CN3600
CN3000
CN3200
CN3001
CN3601
CN3002
ILMB ASSY
DPTH ASSY
DPTH ASSY
LCDB ASSY
FFC (DDD1821)
FFC (DDD1822)
∗
11
∗
11
∗
11
Front
Front
Front
Front
Front
Nut, Washer
Stay
Shield Case
Cover
Knob
[2-3-7] ILMB ASSY
Remove the Sheet (DEC3746).
(Refer to the
“[2-3-4] Sheet (DEC3746)”
.)
-----------------------------------------------------------------
Disconnect the connector.
Remove the two screws (BPZ30P080FNI)
and then remove the ILMB ASSY.
Note on assembling:
Attach first screw to the location indicated
by blue number.
[2-3-8] DPTH ASSY
Remove the Sheet (DEC3746).
(Refer to the
“[2-3-4] Sheet (DEC3746)”
.)
-----------------------------------------------------------------
Remove the Knob (DAA1368).
Note:
It is easily removed with a dessert spoon.
Remove the three screws (BPZ30P080FNI)
and then remove the DPTH ASSY.
Note:
Pay attention for the FFC is connected.
Note on assembling:
Attach first two screws in the order as
shown by orange numbers.
Disconnect the connector on side A and
then remove the DPTH ASSY.
Remove the Nut and Washer (accessory of
VR) and then remove the Stay (DNF1988).
[2-3-9] LCDB ASSY
Remove the two screws (BBZ26P060FTB)
and then remove the Cover.
Remove the six screws (BBZ26P060FTB)
and then remove the Shield Case
(DNH3320).
Disconnect the six connectors.
Note:
∗
11: CN3002, CN3200 and CN3601 have lock
mechanisms.
Remove the six screws (BPZ26P080FTC)
and then remove the LCDB ASSY.
Note on assembling:
Attach first two screws in the order as
shown by pink numbers. Remaining four
screws can be attached in any order.
