39
DJS-1000
5
6
7
8
5
6
7
8
A
B
C
D
E
F
x 10
:
x 3
:
CN8001
CN8502
CN7700
1
2
KSWB ASSY (side-A)
Ferrite Clamper
FFC over
Sheet
FFC (DDD1820)
FFC (DDD1827)
FFC (DDD1827)
FFC (DDD1823)
LCDB ASSY
PADB ASSY
KSWB ASSY
PADB ASSY
PADB ASSY
CDCB ASSY
CDC Stopper
FFC (DDD1820)
∗
10
Front
Front
Front
Front
Sheet
[2-3-4] Sheet (DEC3746)
Remove the screw (BBZ30P060FTB).
Remove the three screws (BPZ30P080FNI)
and then remove the Sheet (DEC3746).
Note:
Sheet (DEC3746) cannot be drawn out
because it is caught by the Ferrite Clamper
(DTX1011) applied to FFC (DDD1820) on
the LCDB ASSY side .
Note on assembling:
∗
10: FFC on the PADB ASSY side must pass
over the claw at the fold of Sheet
(DEC3746).
[2-3-5] KSWB ASSY
Remove the HPJA ASSY and Sheet (DEC3746).
(Refer to the
“[2-3-1] HPJA ASSY”
and
“[2-3-4] Sheet (DEC3746)”
.)
-----------------------------------------------------------------
Discconnect the connector.
Remove the 10 screws (BPZ30P080FNI)
and then remove the KSWB ASSY.
Note:
Pay attention for the FFC is connected.
Note on assembling:
Attach first two screws in the order as
shown by blue numbers. Remaining six
screws can be attached in any order.
Disconnect the connector on side A and
then remove the KSWB ASSY.
[2-3-6] CDCB ASSY
Remove the KSWB ASSY.
(Refer to the
“[2-3-5] KSWB ASSY” . )
-----------------------------------------------------------------
Disconnecrt the connector,
Remove the three screws (BPZ30P080FNI)
and then remove the three CDC Stoppers
and CDCB ASSY.
