34
DJS-1000
1
2
3
4
A
B
C
D
E
F
1
2
3
4
∗
5
∗
6
hook
hook
pin
pin
• Rear view
CN3
CN200
CN5800
CN4
USBA ASSY
MAIN ASSY
MAIN ASSY
MAIN ASSY
AUDB ASSY
Front
Front
Front
[2-2] Chassis Section
Remove the Control Panel Section and Shield
Case (DNH3322) .
(Refer to the
“[2-1-1] Control Panel Section"
and
"[2-1-2] Shield Case (DNH3322)”
.)
-----------------------------------------------------------------
[2-2-1] USBA ASSY
Remove the screw. (BBZ30P060FTB)
Disconnect the connector and then remove
the USBA ASSY.
Note on assembling
∗
5: Screw of step
must be attached after
the parts attached by steps
to
of the
"[2-1-2] Shield Case (DNH3322)”
are
attached.
[2-2-2] MAIN ASSY
Remove the USBA ASSY.
(Refer to the
“[2-2-1] USBA ASSY”
)
-----------------------------------------------------------------
Disconnect the three connectors.
Note
∗
6: CN200 has a lock mechanism.
Remove the two screws. (BBZ30P060FTB)
Remove the two screws. (BBZ30P060FTB)
Remove the four screws. (PMH30P100FTB)
Remove the screw. (DBA1340)
Lift the front side of the MAIN ASSY to
release the two hooks and two pins, and
then remove the MAIN ASSY toward the
front direction.
