28
DJS-1000
1
2
3
4
A
B
C
D
E
F
1
2
3
4
PAGE
12 : AUDIO MIDI
•
Mode for confirmation of the Audio Route
•
Connect the external device such as CDJ PLAYER to the
INPUT terminal.
•
For MODE 1
Output INPUT to all OUT 1/2 / HP.
(HP has reduced the volume to half.)
•
For MODE 2
INPUT through H/W and output from OUT 2. Check H/W thru.
•
Each time you tap the LIMIT button, limiter On/Off state will
toggle, When Limiter button is colored, Limiter is on and
hard limiter is applied to INPUT.
(Adjust the INPUT LEVEL VOLUME so that limiter work.)
* When the modes are switched, automatic fade-out / fade-in processing of sound volume is not carried out,
so the switching noise (popping sound) is output.
Before switching the modes, adjust the sound volume by turning OFF the volume of amplifier at output destination.
PAGE
13 : FACTORY RESET
• This is the mode for
Factory Reset
•
Resets the setting values of utilities etc. to the factory
shipment status excluding a part of setting by pressing
RE
S
ET button.
*
S
etting that is not reset to the factory shipment status by
factory reset.
•
PAD calibration
•
Touch panel calibration
S
etting of touch panel calibration that is set in the Test
Mode is not reset to the factory shipment status even if
the factory reset is executed.
S
etting of touch panel calibration that is set for utilities
is reset to the factory shipment status if the factory
reset is executed.
•
Language setting
AUDIO
No Output
[PAGE 12] Audio MIDI
OFF
Mode1
Mode2
Limiter
RE
S
ET
[PAGE 13] FACTORY RESET
