Part names and functions
33
En
Rear panel
1
Kensington Security Slot
Connects a cable lock for security.
2
MASTER 1 output terminals
Connects a powered speaker, a power amplifier, etc.
•
Compatible with XLR connector type balanced outputs.
Be sure to use these terminals as balanced outputs.
• Be careful not to accidentally insert the power cord plug of another unit
or device into any of these terminals.
• Do not connect devices capable of supplying phantom power to these
terminals.
3
MASTER 2 output terminals
Connects a powered speaker, a power amplifier, etc.
•
Compatible with RCA pin-jack type unbalanced outputs.
4
BOOTH output terminals
Outputs for a booth monitor.
•
Compatible with TRS connector type balanced outputs.
Be sure to use these as balanced outputs.
•
Outputs the master channel sound from the
[BOOTH]
output terminals
regardless of the volume of the master channel sound.
The volume can be adjusted using the
[BOOTH LEVEL]
knob.
5
SIGNAL GND terminal
Connects the ground wire of a turntable to reduce noise that occurs when a
turntable is connected.
