Advanced use
74
En
Using Fader Start
Using Channel Fader Start
1 Set the cue point.
Pause the track at the position you want to start playback from, then press the
[CUE]
button on that deck.
•
You can also set the cue point by moving the channel fader from the top to
the bottom while holding the
[SHIFT]
button during a pause.
2 While holding the
[SHIFT]
button, move the channel fader from the
bottom to the top.
Playback starts from the cue point.
•
If you move the channel fader back to the bottom while holding the
[SHIFT]
button during playback, the track instantly jumps back to the cue point and
playback pauses. (Back Cue)
When no cue point is set, playback starts from the beginning of the track.
When you move the channel fader from the top to the bottom and hold the
[SHIFT]
button while triggering a cue, playback of the track starts from the set
cue point.
