Captain-i, Installation Guide
32
Par.
Descr. Settings
screen (see section Zone responses on page 22), and (2) a “+”
must be set under the G (PGM Delayed) in the Config. 3 screen
(the current screen)
K
Zone 6 Key “-” Defines Zone 6 as connected to a key
K
Key Type
“-“ Momentary key. The normal state is N.O. When applying
ground to the input for a short time and returning to “open
circuit”, the system changes its state from armed to
disarmed or vice versa. This application is suitable for
momentary keys or wireless remote keys
“+”
Two-state key. The system is armed if “open” is detected. If
“close” is detected the system is disarmed
G
PGM
Delayed
When a voice unit is connected to the PGM output, the output
will switch the “-“ only after the system completes dialing a
subscriber (so that the recorded message will not be heard at the
same time as the dialing is occurring, which could cause
communications problems
5.4.5
System configuration 4 (config 4)
[
[
x4:
LLDASSLine Check
------ Config 4
Par.
Descr. Settings
L
Telephone Line
Check in ON
When armed, the system checks the telephone line every
minute
L
Telephone Line
Check in OFF
When disarmed, the system checks the telephone line every
minute
D
Double report
(D)/ Double
Report All (A)
See the following table
Double report:
A D Description
-
- Regular report: Report only once
-
+ Double report: Report all events to station #1 and report only irregular
events to station #2
+
+ Double report: Report all events to stations #1 and #2
When using double or split-reporting, telephone station #1 & #2 will report to central
station #1, and telephone station #3 and #4 will call central station #2 (see page 33).
