SDD ES PROFINET
Operating Manual SDD ES PROFINET
1003826-EN-01
8
Safety
Intended use
The SDD ES PROFINET is used for communication between connected safety devices and
the PROFINET. The PROFINET is designed for data exchange at field level. The SDD ES
PROFINET operates as the IO -Device, a connected control system operates as the IO-
Controller.
Application of the product SDD ES PROFINET:
}
Evaluate and display diagnostic data and status information from safety devices
}
Connect safety devices and PROFINET
}
Processing and display of safety device data
}
Transfer diagnostic data and status information from the safety devices to PROFINET
Appropriate safety devices are listed in the document "System Description Safety Device
Diagnostics".
The SDD ES PROFINET may not be used for safety-related functions.
Safety-related functions of the safety devices have to be evaluated separately by a safe
evaluation device.
The following is deemed improper use in particular
}
Any component, technical or electrical modification to the product,
}
Use of the product outside the areas described in this manual,
}
Use of the product outside the technical details (see
Technical details [
28]
).
NOTICE
EMC-compliant electrical installation
The product is designed for use in an industrial environment. The product
may cause interference if installed in other environments. If installed in other
environments, measures should be taken to comply with the applicable
standards and directives for the respective installation site with regard to in-
terference.
Safety regulations
Additional documents that apply
Please read and take note of the following documents:
}
Operating manual for the relevant Pilz safety device
}
Operating manual of a passive junction, for example:
– PSEN ix2 F4 code
– PSEN ix2 F8 code
– PDP67 F 4 code
– PSEN Y junction