Wiring
Operating Manual PSEN sg2c
1003267-EN-04
25
Terminal
PSEN sg2c-3xxx
PSEN sg2c-5xxxx
PSEN sg2c-5xxxx-
M12/5
X1-14
n.c
Pushbutton 3 LED3
n.c
X1-15
n.c
Pushbutton 4 LED4
Pushbutton 4 LED4
X1-16
Signal output, E-STOP
Signal output, E-STOP
Enabling switch Pin5 and
signal output E-STOP
X2-3
Input, channel 1
Input, channel 1
Input, channel 1
X2-4
Input, channel 2
Input, channel 2
Input, channel 2
X2-9
n.c
n.c
Enabling switch M12 Pin
1 (optional)
X2-10
n.c
n.c
Enabling switch M12 Pin
2 (optional)
X2-11
n.c
n.c
Enabling switch M12 Pin
3 (optional)
X2-12
n.c
n.c
Enabling switch M12 Pin
4 (optional)
X2-13
n.c
Pushbutton 3 channel 1
Pushbutton 3: Key switch
rotated 90° to the left
X2-14
n.c
n.c
Pushbutton 3: Key switch
rotated 90° to the right
X2-15
n.c
Pushbutton 4 channel 1
Pushbutton 4 channel 1
X2-16
n.c
n.c
n.c
5.5
Wiring the connection terminals
Connecting the cables:
}
Use a flat blade screwdriver (DIN 5264-A)!
DIN 5264-A
}
Strip the wire back 7 mm.
}
Insert the screwdriver into the square hole.
}
Insert the stripped wire into the square hole as far as it will go.
}
Pull out the screwdriver.
}
Check that the cable is firmly seated.
