PSEN cs2.13p ATEX
Operating Manual PSEN cs2.13p ATEX
21133-EN-17
| 25
General
Coding level in accordance with EN ISO 14119
High
Design in accordance with EN ISO 14119
4
Classification in accordance with EN 60947-5-3
PDDB
Pilz coding type
fully coded
Transponder
Frequency band
122 kHz - 128 kHz
Max. transmitter output
7 dBm
Electrical data
Supply voltage
Voltage
24 V
Kind
DC
Voltage tolerance
-20 %/+20 %
Output of external power supply (DC)
2 W
Max. inrush current at UB
0,12 A
Max. switching frequency
3 Hz
Max. cable capacitance at the safety outputs
No-load, PNOZ with relay contacts
40 nF
PNOZmulti, PNOZelog, PSS
70 nF
No-load current
50 mA
Inputs
Number
2
Voltage at inputs
24 V DC
Input current range
5 mA
Max. overall cable resistance Rlmax
Single-channel at UB DC
1000 Ohm
Semiconductor outputs
OSSD safety outputs
2
Signal outputs
1
Switching current per output
500 mA
Breaking capacity per output
12 W
Potential isolation from system voltage
No
Short circuit-proof
yes
Residual current at outputs
10 µA
Voltage drop at OSSDs
3,5 V
Lowest operating current
0 mA
Utilisation category in accordance with EN 60947-1
DC-12
Times
Test pulse duration, safety outputs
450 µs
Switch-on delay
after UB is applied
1 s
Inputs typ.
13 ms
Inputs max.
20 ms
Actuator typ.
60 ms
Actuator max.
150 ms
