Pilous 20875-0204, Instruction Manual

Page: 17 / 110

16
5.9 Control Board
ARG 400 Plus S.A.F
Band saw head end
ascending switch
Saw blade speed controller
DISPLAY showing the saw blade speed
Start Total stop
Control valve
Mode
Hydraulic unit
Start - stop
Master switch Signal lamp
Vice
Saw blade
Start - stop
in guiding heads. For corrections, if necessary, see 5.6. Close the guards of
the band saw head, connect the machine to supply, switch on the master
switch and the hydraulic unit. Carry out the first cut.
5.8. Regulation of Saw Blade Feed Pressure
(pouze ARG 380 PLUS S.A.F., ARG 500 PLUS S.A.F.)
This system serves to control the force of cutting (slowing down of saw
head descending), which is particularly advantageous when profile materi-
als are being cut. During the cutting process, a saw blade deflection occurs,
which is transferred via the control roller to the control pin cam on the con-
trol head.
Setting of sensitivity:
The control sensitivity decreases when the control wheel is being screwed
in.
1 - maximum sensitivity
4 - control off, the band saw head is lowered with always the same veloci-
ty preset on the throttle valve arranged on the control board.