manualshive.com logo in svg

PIETRO FIORENTINI REFLUX 819/FO, Technical Manual

The PIETRO FIORENTINI REFLUX 819/FO is a cutting-edge technical marvel designed for optimal performance. This versatile product comes with a comprehensive user manual, available for free download from manualshive.com. Ensure a seamless experience with this advanced device by referring to the detailed manual at your convenience.

Share
Download
background image

7

TECHNICAL MANUAL MT103

INDEX

1.0 INTRODUCTION...........................................................................................................PAGE  9

1.1 MAIN 

SPECIFICATIONS..............................................................................................................................................9

1.2 OPERATION................................................................................................................................................................9
1.3 SETTING 

SPRINGS ..................................................................................................................................................12

2.0 INSTALLATION...................................................................................................................13

2.1

GENERAL .................................................................................................................................................................13

3.0 ACCESSORIES ...................................................................................................................15

3.1

RELIEF VALVE ..........................................................................................................................................................15

3.1.1  DIRECT INSTALLATION IN THE LINE.......................................................................................................................16
3.1.2  INSTALLATION WITH ON/OFF VALVE ......................................................................................................................17
3.2 ACCELERATOR.........................................................................................................................................................17

4.0 MODULARITY....................................................................................................................18

4.1 

INCORPORATED SLAM-SHUT VALVE ......................................................................................................................18

4.2 

INCORPORATED SB/82 SLAM-SHUT VALVE ...........................................................................................................18

4.2.1 SB/82 SLAM-SHUT OPERATION..............................................................................................................................19
4.2.2 SB/82 SLAM-SHUT SETTING SPRINGS ..................................................................................................................21
4.3 

INCORPORATED HB/97 SLAM-SHUT VALVE ...........................................................................................................22

4.3.1 HB/97 OPERATION...................................................................................................................................................23
4.3.2 HB/97 SLAM-SHUT SETTING SPRINGS ..................................................................................................................25
4.4 MONITOR.................................................................................................................................................................26
4.4.1 PM/819 INCORPORATED MONITOR........................................................................................................................26
4.4.2 IN-LINE MONITOR ...................................................................................................................................................27
4.4.3 SETTING SPRINGS ..................................................................................................................................................28

5.0 START 

UP ........................................................................................................................29

5.1 GENERAL .................................................................................................................................................................29
5.2 

GAS INPUT, CONTROL OF EXTERNAL TIGHTNESS AND SETTING .........................................................................30

5.3

COMISSIONING THE REGULATOR WITH INCORPORATED SB/82 SLAM-SHUT .....................................................31

5.4

COMMISSIONING THE REGULATOR WITH INCORPORATED PM/819 MONITOR AND 
ACCELERATING VALVE ............................................................................................................................................34

5.5

COMMISSIONING THE REGULATOR WITH REFLUX 819 IN-LINE MONITOR WITH INCORPORATED SB/82
SLAM-SHUT VALVE .................................................................................................................................................35

5.6

COMMISSIONING THE REGULATOR PLUS REFLUX 819/FO IN-LINE MONITOR WITH
SB/82 SLAM-SHUT VALVE.......................................................................................................................................36

6.0 TROUBLE-SHOOTING...........................................................................................................39

6.1 

REFLUX 819/FO REGULATOR ..................................................................................................................................39

6.2 PM/819 

MONITOR ...................................................................................................................................................41

6.3 SB/82 

SLAM-SHUT ..................................................................................................................................................42

7.0 MAINTENANCE ..................................................................................................................43

7.1 GENERAL .................................................................................................................................................................43
7.2 

REFLUX 819/FO REGULATOR MAINTENANCE PROCEDURE ...................................................................................44

7.3 

PM/819 MONITOR MAINTENANCE PROCEDURE ....................................................................................................51

7.4

DB/819 SILENCER MAINTENANCE PROCEDURE ....................................................................................................57 . 

7.5

SLAM-SHUT DEVICE SB/82 MAINTENANCE PROCEDURE......................................................................................59

8.0 FINAL 

OPERATIONS ............................................................................................................62

8.1 

TIGHTNESS SETTING CHECK ..................................................................................................................................62

8.2

START UP ................................................................................................................................................................62

9.0 

WEIGHT OF THE COMPONENTS ..............................................................................................65

9.1

WEIGHT OF THE COMPONENTS IN KG ...................................................................................................................65

10.0  LIST OF RECOMMENDED SPARES ...........................................................................................66

                                 | [email protected] | Phone: 877.566.3837 | Fax: 925.407.2903

Summary of Contents for REFLUX 819/FO






























































































Reviews:

No comments

Related manuals for REFLUX 819/FO

Lakeshore 336 User Manual preview
336
Brand: Lakeshore Pages: 192
QUAD 33 Instruction Book preview
33
Brand: QUAD Pages: 16
Saitek P880 User Manual preview
P880
Brand: Saitek Pages: 44
UNITED 7700 Series Maintenance & Operation Manual preview
7700 Series
Brand: UNITED Pages: 8
HABONIM 77 Series Operating Maintenance Installation preview
77 Series
Brand: HABONIM Pages: 9
janitza 800-CT8-A User Manual And Technical Data preview
800-CT8-A
Brand: janitza Pages: 58
Paradox Digiplex DGP-848 Reference And Installation Manual preview
Digiplex DGP-848
Brand: Paradox Pages: 20
U-Prox IC L Installations preview
IC L
Brand: U-Prox Pages: 3
Xantrex Trace C35 Installation And Operation Manual preview
Trace C35
Brand: Xantrex Pages: 56
Xantrex TrueCharge 2 Owner'S Manual preview
TrueCharge 2
Brand: Xantrex Pages: 2
Xantrex Freedom Sequence Owner'S Manual preview
Freedom Sequence
Brand: Xantrex Pages: 58
Xantrex Freedom e-GEN Checklist preview
Freedom e-GEN
Brand: Xantrex Pages: 4
Xantrex AGS Owner'S Manual preview
AGS
Brand: Xantrex Pages: 20
Jetter JetWeb JX2-PRN1 Operator'S Manual preview
JetWeb JX2-PRN1
Brand: Jetter Pages: 25
I-Tork PDS Series Installation & Operation Manual preview
PDS Series
Brand: I-Tork Pages: 15
MGC RAXN-LCD Installation And Wiring Manual preview
RAXN-LCD
Brand: MGC Pages: 16
Halma ZoneSense Plus AS Manual preview
ZoneSense Plus AS
Brand: Halma Pages: 58
Cypress CY3643 Quick Start Manual preview
CY3643
Brand: Cypress Pages: 2

Brands by name

Popular brands

Load more brands