27
gpmax
-
returns the maximum strength of the proportional part of
the current regulator.
sp
value
sets the strength of the proportional part of the current
regulator to the given value.
gvcap
-
returns the actual pre charge voltage of the internal capacitor
bank in [V].
gvcapmin
-
returns the minimum pre charge voltage of the internal
capacitor bank in [V]
gvcapmax
-
returns the maximum pre charge voltage of the internal
capacitor bank in [V]
svcap
voltage in [V]
sets the pre charge voltage of the internal capacitor bank to
the given value in [V]. One position after decimal point is
used (e.g. 12.5)
gidelay
-
returns the delay value to witch the output current must rise
before the integral part of the current regulator is switched
on. This value is measured in percent of the set point current.
gidelaymin
-
returns the minimum i-delay value
gidelaymax
-
returns the maximum i-delay value
sidelay
delay in %
sets the delay value to witch the output current must rise
before the integral part of the current regulator is switched
on to the given value. This value is measured in percent of
the set point current.
