SECTION 2: SETTING UP YOUR ZYMATIC
®
- CONTINUED
16
17
2. Hand tighten by screwing the flare nut onto the Zymatic,
then use the black plastic wrench to tighten further.
3. Keep the black plastic wrench and extra nylon washers
with this manual in case they are needed for any repairs
or replacements.
Remove red plug from the stepper arm. During plug removal
exercise caution so as to not yank or pull on stepper arm.
Plug the power cord into the back of the machine and into
an outlet. The Zymatic requires at least a 15 amp outlet
(standard in most houses). Do not overload the outlet with
other appliances that will use more than 15 amps.
If you are using Ethernet, plug the Ethernet cord into the back
of the machine. If you are using WiFi, skip this step. WiFi set
up will be completed upon the initial startup of the Zymatic
with on-screen instructions.
3
4
