21
SECTION 2: SETTING UP YOUR ZYMATIC
®
- CONTINUED
20
A welcome screen will appear on the OLED display. Press the
control knob once to get to the menu. Select “Clean/Rinse.”
Then, select “Rinse” and the Zymatic will begin the initial
rinse cycle.
Once the rinse cycle completes, the Zymatic returns to
the main menu. Remove your step filter and dump out any
remaining water.
Disconnect the keg from the machine. To disconnect the
ball locks, pull up on the outer ring of the ball lock, and pull the
ball lock off of the kegpost. Dump any remaining water out
of the keg.
6
7
8
