PIAGGIO Beverly Tourer 125, Service Station Manual

Page: 77 / 278

FUSE TABLE
Specification Desc./Quantity
1 Fuse No. 1 Position on fuse holder: 1
Capacity: 7.5 A
Protected circuits: Front tail light - Rear tail light - In-
strument panel lighting - License plate light
Location: Front case
2 Fuse No. 2 Position on fuse holder: 2
Capacity: 7.5 A
Protected circuits: Power supply for Instrument panel
- Horn - Light switch
Location: Front case
3 Fuse No. 3 Position on fuse holder: 3
Capacity: 7.5 A
Protected circuits: Scooter start-up enabling switch -
Ignition - Engine disabled warning light
Location: Front case
4 Fuse No. 4 Position on fuse holder: 4
Capacity: 3A
Protected circuits: Electric pump control device
Location: Front case
5 Fuse No. 5 Position on fuse holder: 5
Capacity: 15A
Protected circuits: Spare fuse
Location: Right fairing
6 Fuse No. 6 Position on fuse holder: 6
Capacity: 10 A
Protected circuits: Spare fuse
Location: Right fairing
7 Fuse No. 7 Position on fuse holder: 7
Capacity: 15A
Protected circuits: Radiator electrical fan - Battery re-
charge - Ignition - Lines protected by fuses 1; 2; 4
Location: Right fairing
8 Fuse No. 8 Position on fuse holder: 8
Capacity: 15A
Protected circuits: 12V-180W Socket for electrical
equipment - Helmet compartment light - Electrical saddle
opening
Location: Right fairing
9 Fuse No. 9 Position on fuse holder: 9
Capacity: 10 A
Protected circuits: Low- and high-beam light - Head-
light remote control - Light switch
Location: Right fairing
10 Fuse No. 10 Position on fuse holder: 10
Capacity: 4A
Protected circuits: Clock - Immobilizer LED
Location : Right fairing
Sealed battery
If the vehicle is provided with a sealed battery, the only maintenance required is the check of its charge
and recharging, if necessary.
Beverly 125
Electrical system
ELE SYS - 77