PIAGGIO Beverly Tourer 125, Service Station Manual

Page: 200 / 278

Locking torques (N*m)
Oil bleed screw
12 - 16
Front brake pump
Removal
- Remove the rear handlebar cover.
- Drain the brake system.
- Disconnect the brake fluid line from the pump,
paying attention to a possible escape of remaining
brake fluid.
- Remove the front and rear brake stop button from
the lever.
- Loosen the two retaining screws of the stand and
remove together with the rear view mirror.
- Remove the front brake pump together with the
lever.
See also
Rear handlebar cover
Front
Overhaul
1) Remove the brake lever by loosening the fixing screw;
open the cover (2) and take out the diaphragm (3);
2) Remove the cap and unscrew the internal parts in the specified order;
3) Check that:
- The body of the pump shows no signs of internal damage or corrosion;
- The piston shows no sign of damage or abnormal wear;
- The piston return spring is in good condition.
Refitting
Reinstall the individual parts in the reverse order to the removal, paying attention to the correct posi-
tioning of the rubber parts in order to ensure leak tightness.
1. Tank cover screw
2. Tank cover
3. Diaphragm
4. Bellows
5. Seal ring
6. Piston
Braking system
Beverly 125
BRAK SYS - 200