PIAGGIO 2005 XEVO 400ie, Workshop Manual

Page: 66 / 376

Zeroing
- To access the saddle opening control/reception
unit, remove the left side fairing.
- A white cable, that comes from pin 3 of the control
unit, goes out from the wiring.
- Earth the cable at least 10 seconds in order to
delete all the remote controls stored in the control
unit.
Programming
- Follow these steps to program the remote controls:
1. Insert the remote control key to be programmed in the steering lock key block.
2. Turn the key to ON, press the button on the remote control, release the button, turn the key back to
OFF from the ON position, all within four seconds.
3. Wait 1 to 8 seconds
4. Repeat steps 2 and 3 for 4 times without removing the key. The control unit confirms the programming
has been successful by opening the saddle.
N.B.
THE CONTROL UNIT CAN PROGRAMME UP TO 7 REMOTE CONTROLS.
Electrical system
XEVO 400ie
ELE SYS - 66