PIAGGIO 2005 XEVO 400ie, Workshop Manual

Page: 191 / 376

43. Injection load remote control
45. Fuel injector
48. Instrument panel
50. HV coil
51. Immobilizer aerial
52. Decoder
53. Injection ECU
54. Intake air temperature sensor
55. Fuel pump
56. Diagnosis connector
57. Electric fan remote control
58. Engine rpm sensor
59. Stepper motor
60. Engine temperature sensor
61. Throttle valve potentiometer
62. Lambda probe
Removing the injector
N.B.
ONLY REMOVE THE INJECTOR FROM THE MANIFOLD IN THE EVENT OF A PROVEN DEFECT.
OPERATING TEST OF THE INJECTOR MUST BE PERFORMED WITH THE INJECTOR INSTALLED
ON THE MANIFOLD (SEE "INJECTION").
- To remove the injector, remove the central set
screw of the "T" shunt acting as a support for the
injector.
- Remove the injector from the manifold.
XEVO 400ie
Injection
INJEC - 191