PIAGGIO 2005 XEVO 400ie, Workshop Manual

Page: 273 / 376

- Insert the spring with the thickest turns at the
bottom.
- Insert the stem into the fork clamp.
- Tighten the clamp to screw the top stem closing
cap.
- Check that the sealing ring on the cap is in good
working order, then tighten the cap on the stem to
the prescribed torque.
Locking torques (N*m)
Stem upper cap
35 - 55
- Loosen the fork clamp screws and move the stem
closing cap in abutment with the clamp.
- Tighten the clamp screws to the prescribed tor-
que.
Locking torques (N*m)
Fork clamp screws
20 ÷ 25
- Grease the tapered bearing using the specified
product.
Recommended products
AGIP GREASE PV2 Grease for the steering
bearings, pin seats and swinging arm
White anhydrous-calcium based grease to protect
roller bearings; temperature range between -20 C
and +120 C; NLGI 2; ISO-L-XBCIB2.
- Insert the fork into the headstock.
- Insert the tapered bearing after applying the
specified product.
Recommended products
AGIP GREASE PV2 Grease for the steering
bearings, pin seats and swinging arm
White anhydrous-calcium based grease to protect
roller bearings; temperature range between -20 C
and +120 C; NLGI 2; ISO-L-XBCIB2.
- Using the special tool, tighten the first ring-nut on the steering tube to a holding torque, then tighten
completely.
XEVO 400ie
Suspensions
SUSP - 273