PIAGGIO 2005 XEVO 400ie, Workshop Manual

Page: 223 / 376

RESISTANCE OF THE RPM TIMING SENSOR: (
AT
25°C)
Specification Desc./Quantity
1 Model with 1 clamp: 860
Ω
± 130
Ω
2 Model with 2 clamps: 680
Ω
± 100
Ω
YES go to 11 NO go to 12
11 - Check the earth isolation between a pole and the shielding.
(see the «Electrical system» chapter).
Electric characteristic
S - + =
infinite (>M
Ω
)
YES go to 13 NO go to 12
12 - Replace the revolution sensor.
13 - Reconnect the rpm-timing sensor connector.
Repeat the resistance check through the injection
wiring pin 7, pin 12.
Electric characteristic
7-12 =
680
Ω
± 100
Ω
(Model with 2 clamps)
7-12 =
890
Ω
± 130
Ω
(Model with 1 clamp)
The value should be very close to that detected directly by the sensor.
YES go to 17 NO go to 14
14 - Higher or infinite resistance.
YES go to 15 NO go to 16
XEVO 400ie
Injection
INJEC - 223