2 Safety
U651 Rotation Stage
MP136E
Version: 1.3.0
5
In this Chapter
Intended Use .................................................................................................................................. 5
General Safety Instructions............................................................................................................ 5
Organizational Measures ............................................................................................................... 6
2.1
Intended Use
The U-651 is a laboratory device as defined by DIN EN 61010-1. It is intended for indoor use and
use in an environment that is free of dirt, oil and lubricants.
In accordance with its design and realization, the U-651 is intended for single-axis positioning,
adjusting and rotation of loads in at different velocities in interval operation. The U-651 is
not
intended for applications in areas where failure could lead to considerable risk to people or the
environment.
It is only possible to use the U-651 as intended when it is installed and connected properly.
The U-651 uses PILine® ultrasonic piezo motors as a drive and must be operated with a suitable
controller (p. 10). The controller is not included in the scope of delivery of the U-651.
2.2
General Safety Instructions
The U-651 is built according to state-of-the-art technology and recognized safety standards.
Improper use can result in personal injury and/or damage to the U-651.
Use the U-651 for its intended purpose only, and only when it is in perfect technical
condition.
Read the user manual.
Eliminate any malfunctions that may affect safety immediately.
The operator is responsible for the correct installation and operation of the U-651.
Piezo motors are driven by piezo actuators. Piezo actuators can remain electrically charged for
several hours after disconnecting the electronics. Temperature changes can also induce charges
in piezo actuators. Touching charged parts of the U-651 can cause slight injuries from electric
shock.
Do
not
open the U-651.
Do
not
touch the contacts in the connector of the U-651.
2
Safety
