PI U--651 Series, User Manual

Page: 19 / 51

5 Installation
U­651 Rotation Stage MP136E Version: 1.3.0 15
In this Chapter
General Notes on Installing ......................................................................................................... 15
Connecting the U-651 to the Protective Earth Conductor .......................................................... 17
Mounting the U-651 onto a Surface ............................................................................................ 18
Fixing the Load to the U-651 ........................................................................................................ 20
Connecting the Vacuum Version to the Controller ..................................................................... 22
5.1 General Notes on Installing
CAUTION
Dangerous voltage and residual charge on piezo actuators!
Piezo motors are driven by piezo actuators. Piezo actuators can remain electrically charged for
several hours after disconnecting the electronics. Temperature changes can also induce
charges in piezo actuators. Touching or short-circuiting the contacts in the connector of the
U-651 can lead to minor injuries from electric shock.

Do
not
touch the contacts in the connector of the U-651.
NOTICE
Lubricants, dirt, condensation!
Dirt, oil, lubricants and condensation will render the motor/drive inoperable.

Make sure that the piezo motors of the U-651 do not come into contact with lubricants.

Keep the U-651 free from dirt and condensation.
NOTICE
Heating up of the U­651 during operation!
The heat produced during operation of the U-651 can affect your application.

Install the U-651 so that your application is not affected by the dissipating heat.
5 Installation