PI M-605 Series, User Manual

Page: 7 / 35

2 Safety
M-605 High-Precision Linear Stage MP45E Version: 1.2.0 3
2.1 Intended Use
The M-605 is a laboratory device as defined by DIN EN 61010. It is intended for indoor use and
use in an environment which is free of dirt, oil, and lubricants.
In accordance with its design, the M-605 is intended for single-axis positioning, adjusting and
shifting of loads at different velocities. The M-605 is not intended for applications in areas, in
which a failure would represent severe risks to human beings or the environment.
The intended use of the M-605 is only possible when completely mounted and connected. The
M-605 must be operated with a suitable controller (p. 21). The controller is not in the scope of
delivery of the M-605.
2.2 General Safety Instructions
The M-605 is built according to state-of-the-art technology and recognized safety standards.
Improper use of the M-605 may result in personal injury and/or damage to the M-605.

Only use the M-605 for its intended purpose, and only if it is in perfect condition.

Read the user manual.

Immediately eliminate any faults and malfunctions that are likely to affect safety.
The operator is responsible for correct installation and operation of the M-605.
2.3 Organizational Measures
User manual

Always keep this user manual available when using the M-605.
The latest versions of the user manuals are available on our website (p. 2) for
download.

Add all information from the manufacturer such as supplements or technical notes to
the user manual.

If you give the M-605 to other users, also include this user manual as well as all other
relevant information provided by the manufacturer.

Only use the device on the basis of the complete user manual. Missing information due
to an incomplete user manual can result in damage to equipment.

Only install and operate the M-605 after you have read and understood this user
manual.
Personnel qualification
The M-605 may only be installed, started, operated, maintained, and cleaned by authorized and
appropriately qualified personnel.
2 Safety