PI M-605 Series, User Manual

Page: 13 / 35

5 Installation
M-605 High-Precision Linear Stage MP45E Version: 1.2.0 9
5.1 General Notes on Installation
CAUTION
Risk of crushing by moving parts!
Risk of minor injuries from crushing between the moving parts of the M-605 or the load and a
fixed part or obstacle.

Use safeguards to protect limbs in areas where they could be caught by moving parts.

Maintain the safety distances according to DIN EN ISO 13857 when installing protective
structures.
CAUTION
Risk of injury or damage if anything is put on the bellows!
Putting anything on the bellows can cause injury or damage.

Do not put anything on the blellows.
5.2 Mounting the M-605
M-605 stages can be mounted in any orientation, horizontally or vertically. To achieve the
specified guiding accuracy, the stages must be mounted on an even surface to avoid torsion of
the base.
Requirements

You have read and understood the general notes on installation (p.9).

The place of installation is in a clean environment.
Although provided with a flexible bellows to protect against dust and liquids, the unit is
not hermetically sealed. Make sure that metal dust and liquid spray do not enter the
case.

You have provided a suitable surface with a flatness of ≤ 50 μm.
For the required position and depth of the holes for accommodating the screws and
locating pins, see "Dimensions" (p. 24).
Tools and accessories

Mounting kit; in the scope of delivery (p. 5)
− 4 metric screws M4x35
5 Installation