PI M-605 Series, User Manual

Page: 15 / 35

5 Installation
M-605 High-Precision Linear Stage MP45E Version: 1.2.0 11

Suitable tool for tightening the screws of the connector
Connecting the M-605 to a controller
1. If necessary: Remove the protective caps from all connections of the M-605.
2. Connect the M-605 and the controller to each other by means of the motor cable.
3. Use the integrated screws to secure the connections against accidental disconnection.
5.5 Connecting the Power Supply to the M-605
Requirements

The power cord is not connected to the power socket.
Tools and accessories

Supplied components; in the scope of delivery (p. 5):
−
Wide-range-input power supply
−
Adapter for the power supply connection; barrel connector to Switchcraft 3-pin
connector (f)
− Power cord

If one of the components supplied for connecting to the power supply has to be
replaced: Use a sufficiently rated and certified replacement component.
Connecting the power supply to the M-605
1. Connect the adapter's Switchcraft connector (f) to the M-605's 24 V DC panel plug.
2. Connect the adapter's barrel connector to the power supply's barrel connector socket.
3. Connect the power cord to the power supply.