NOTICE
Impermissibly high load on the L-417.099232B
An impermissible high load impairs the motion of the platform and can damage the
L-417.099232B.
►
Pay attention to the
maximum permissible forces (p. 25)
that may act on the motion
platform.
►
In the case of multi-axis systems, include the masses of the positioners to be moved
when calculating the load.
Fixing the Load
1. If necessary: Insert the locating pins into the corresponding holes in the motion platform.
2. Align the load on the motion platform so that the mounting holes selected in the motion
platform can be used for mounting the load.
3. Place the load onto the motion platform so that the locating pins are inserted into the
corresponding locating holes in the load.
4. Tighten the screws in all mounting holes.
5. Check that the load is fixed firmly to the motion platform.
6.4
Connecting the L-417.099232B
Tools and Accessories
■
Suitable cable set
■
If necessary: Suitable screwdriver for the locking screws of the connectors.
Requirements
✓
You have read and understood the
general safety instructions (p. 7)
.
✓
You have read and understood the user manual for the electronics used.
✓
You have installed the electronics properly.
✓
The electronics are switched off.
NOTICE
Damage due to incorrect connection of the L-417.099232B!
Connecting unsuitable electronics or a wrong cable can damage the L-417.099232B or the
electronics.
►
Connect the L-417.099232B to suitable electronics from PI miCos only.
►
Use cables from PI miCos only to connect the L-417.099232B to the electronics.
Connecting the L-417.099232B
1. If necessary: Remove the ESD protective caps from the connections of the L-417.099232B.
2. All of the L-417.099232B's connections must be made in the following order:
a) Limit switch connector
b) Purge air connector
c) Rotary encoder connector
d) Drive connector
3. Secure the connectors against unintentional removal.
6 INSTALLATION
L417M0004EN
‒
11/21/2018
17
M O T I O N | P O S I T I O N I N G
