5 Installation
18
Version: 1.1.0
MP150E
L-406 Compact Linear Stage
Tools and accessories
Mounting kit, included in the scope of delivery (p. 10)
−
4 or 8 socket head screws, ISO 4762 - M4x12
−
Optional: 2 dowel pins, ISO 2338 - 4h8x10 or 3h8x6 for use as locating pins
Hex key, AF 3
Attaching the positioner to an underlying surface
1.
Align the L-406 on the underlying surface so that the corresponding mounting holes in
the L-406 and underlying surface are in line.
If you use locating pins to align the L-406:
a)
Insert the locating pins into the respective holes in the underlying surface.
b)
Put the L-406 onto the underlying surface so that the locating pins are inserted into
the corresponding locating holes on the other side.
2.
Allow access to the mounting holes in the base body of the L-406. Possible measures:
−
Temporary startup of the positioner (p. 31) and commanding the platform to a
suitable position
−
Moving the platform by hand (p. 36)
3.
Tighten the screws in all accessible mounting holes completely.
4.
Repeat steps 2 to 4 for all necessary holes required.
5.
Check that the L-406 is fixed firmly to the underlying surface.
5.3
Connecting the L-406 to the Protective Earth Conductor
INFORMATION
It is only necessary to connect the L-406 to the protective earth conductor when both of the
following conditions are met:
The load on the platform of the L-406 must be connected to the protective earth
conductor, but it is not possible to connect the protective earth conductor directly to the
load.
The load and the platform are connected conductively to each other.
INFORMATION
Pay attention to the applicable standards for connecting the protective earth conductor.
