6 Startup
L-406 Compact Linear Stage
MP150E
Version: 1.1.0
31
6.1
General Notes on Startup
CAUTION
Risk of crushing by moving parts!
There is a risk of minor injuries from crushing between the moving parts of the positioner or
the load and a fixed part or obstacle.
Use protective structures to keep limbs away from areas in which they could be caught by
moving parts.
Observe the safety distances in accordance with DIN EN ISO 13857 when installing
protective structures.
NOTICE
Damage due to collisions!
Collisions can damage the positioner, the load to be moved, and the surroundings.
Make sure that no collisions are possible between the positioner, the load to be moved,
and the surroundings in the motion range of the positioner.
Do not place any objects in areas where they can be caught by moving parts.
Stop the motion immediately if a controller malfunction occurs.
If possible, adapt the travel range limits of your mechanical system in the software that
you use for commanding the motion.
NOTICE
Operating voltage excessively high or incorrectly connected!
Operating voltages that are too high or incorrectly connected can cause damage to the L-406.
Do
not
exceed the operating voltage range (p. 45) for which the L-406 is specified.
Only operate the L-406 when the operating voltage is properly connected; see "Pin
Assignment" (p. 52).
6
Startup
