7 Maintenance
36
Version: 1.1.0
MP150E
L-406 Compact Linear Stage
7.3
Cleaning the L-406
Requirements
You have disconnected the positioner from the controller.
Cleaning the positioner
When necessary, clean the surface of the positioner with a cloth dampened lightly with
a mild cleanser or disinfectant.
7.4
Moving the Motion Platform Manually
INFORMATION
In the following cases, it can be necessary to manually move the platform:
To allow access to the mounting holes in the positioner's base body for the screws.
To move the platform away from the hard stop to re-establish operational readiness of the
positioner.
Figure 9: Position of the spindle access (all models)
