Phytec phyCORE-MPC5200B tiny, Hardware Manual

Page: 9 / 104

Preface
©
PHYTEC Messtechnik GmbH 2006 L-678e_0
1
Preface
This phyCORE-MPC5200B tiny Hardware Manual describes the
board’s design and functions. Precise specifications for the Freescale
MPC5200B microcontroller series can be found in the enclosed
MPC5200B microcontroller Data Sheet/User's Manual. If software is
included please also refer to additional documentation for this
software.
In this hardware manual and in the attached schematics, low active
signals are denoted by a "/" in front of the signal name (i.e.: /RD). A
"0" indicates a logic-zero or low-level signal, while a "1" represents a
logic-one or high-level signal.
Declaration regarding Electro Magnetic Conformity
of the PHYTEC phyCORE-MPC5200B tiny
PHYTEC Single Board Computers (henceforth products) are designed
for installation in electrical appliances or as dedicated Evaluation
Boards (i.e.: for use as a test and prototype platform for
hardware/software development) in laboratory environments.
Note:
PHYTEC products lacking protective enclosures are subject to
damage by ESD and, hence, may only be unpacked, handled or
operated in environments in which sufficient precautionary measures
have been taken in respect to ESD dangers. It is also necessary that
only appropriately trained personnel (such as electricians, technicians
and engineers) handle and/or operate these products. Moreover,
PHYTEC products should not be operated without protection circuitry
if connections to the product’s pin header rows are longer than 3 m.